Abstract

Artificial drying method for arabica coffee beans requires a large consumption of electrical energy. Electricity is needed to rotate the blower which functions to circulate hot air to the dryer so that it can evaporate some of the water contained in the coffee beans. Most of the arabica coffee producing areas in Aceh province have not been reached by the electricity network so the use of artificial dryers cannot be used. To overcome this obstacle, the air flow circulation system with chimney effect can be used to drain dry air. The aim of this research is to design a chimney effect hybrid dryer which is heat source from solar and biomass energy, to test the performance of the dryer and compare it with the sun drying method. Parameters observed were temperature, moisture content and specific energy consumption of solar radiation and biomass. Dryer capacity is 5 kg of arabica coffee beans. The results showed that the chimney effect hybrid dryer can be used to dry 5 kg of coffee beans. The drying show that drying temperature on the dryer chamber ranged between 37.3-60.9°C. To reduce the moisture content of coffee beans from 52.5 to 12.8% bb, it was take 16-17 hours, while the sun drying method takes up to 46 hours (6 days). The total specific energy consumption of hybrid dryer was 57.1 MJ/kg of water vapor, while the specific energy consumption of the drying method was 59.4 MJ/kg of water vapor.

Highlights

  • Provinsi Aceh merupakan salah satu sentra penghasil kopi arabika dikenal dengan nama kopi arabika Gayo

  • The results showed that the chimney effect hybrid dryer can be used to dry 5 kg of coffee beans

  • Analisis Pengering pada Alat Pengeringan Kopi (Coffea Sp.) Efek Rumah Kaca Berenergi Surya [Tesis]

Read more

Summary

Ucapan Terima Kasih

Redaksi Jurnal Keteknikan Pertanian mengucapkan terima kasih kepada para Mitra Bebestari yang telah menelaah (me-review) Naskah pada penerbitan Vol 7 No 3 Desember 2019. Ucapan terima kasih disampaikan kepada: Prof.Dr.Ir. Bambang Purwantana, M.Agr (Fakultas Teknologi Pertanian, Universitas Gadjah Mada), Dr.Ir. Nugroho Tri Waskito, MP (Fakultas Pertanian dan Peternakan, Universitas Muhammadiyah Malang), Dr Ardiansyah, S.TP, M.Si (Fakultas Pertanian, Universitas Jenderal Soedirman), Dr Ridwan Rahmat (Balai Penelitian Pasca Panen Cimanggu), Prof.Dr.Ir. Budi Indra Setiawan, M.Agr. (Departemen Teknik Sipil dan Lingkungan, Fakultas Teknologi Pertanian, Institut Pertanian Bogor), Prof.Dr.Ir. Sutrisno M.Agr (Departemen Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, Institut Pertanian Bogor), Dr.Ir. Wawan Hermawan, MS (Departemen Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, Institut Pertanian Bogor), Dr.Ir. Dyah Wulandani, MSi (Departemen Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, Institut Pertanian Bogor), Dr Slamet Widodo, S.TP, M.Sc (Departemen Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, Institut Pertanian Bogor), Dr Liyantono, S.TP, M.Agr (Departemen Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, Institut Pertanian Bogor)

Metode Penelitian
Desain dan Uji Kinerja Alat pengering Hybrid
Ruang Pengering
Tungku Pembakaran
Penurunan Kadar Air terhadap Waktu dan Laju Pengeringan
Jumlah kayu bakar kg
Konsumsi Energi Spesifik Selama Proses Pengeringan
Daftar Pustaka
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call