Abstract
Atmospheric plasma spraying (APS) was used to fabricate 4.5 mol% Y2O3 stabilized ZrO2 (YSZ) and 4.0 mol% Yb2O3 and 0.5 mol% Y2O3 co-stabilized ZrO2 (YbYSZ) series coatings with different spraying parameters. This study presents the effects of particle size of feed powder and substrate temperature on the microstructure and performance of thermal barrier coatings. Single-pass and multi-pass experiments were conducted to explore the relationship between the splat and the coatings. The experimental results indicate that adjusting particle size of feed powders and deposition temperature can alter the splat behaviour and microstructure, improve anti-corrosion and anti-sintering abilities, and enhance the hardness and elastic modulus. Changes in parameters can cause changes in the microstructure of as-sprayed coatings. Lower substrate temperatures can lead to vertical cracks, finer powders can introduce more microdefects, and conventional sized powders can form larger pores. A coating deposited using a conventional feed powder at a substrate temperature of 800 °C shows excellent sintering resistance. A coating deposited using a fine feed powder on 800 °C substrate exhibits the best calcium‑magnesium-alumina-silicate (CMAS) corrosion resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
