Depolymerisation of poly(lactide) under continuous flow conditions.

Abstract

Poly(l-lactic acid) (PLLA) is commercially successful bio-based plastic, where end-of-life materials can undergo industrial composting. To create a circular economy, a desirable alternative to composting is chemical recycling to monomer (CRM), where direct depolymerisation to l-lactide can be achieved. CRM of PLLA is typically impeded by thermal decomposition and side reactions, due to the high ceiling temperate (T c) of PLLA in bulk (>600 °C), which preclude implementation on a large scale, and has led to the development of catalytic strategies, under vacuum or high dilution in high boiling point solvents conditions. In this study, a commercially available Sn(ii) catalyst and low boiling point solvents, at a range of temperatures and concentrations, were explored for the CRM of PLLA in a continuous flow process. The solvent THF was found to produce the best results, where up to 92% conversion of lactide could be achieved, with 92-97% selectivity for l-lactide formation at temperatures 150-170 °C. Further, inline monitoring of monomer and polymer concentrations in flow were used to determine the depolymerisation rate coefficient k depo and the activation energy of k depo was determined to be 129.4 kJ mol-1.