Deployable Tubular Mechanisms Integrated with Magnetic Anchoring and Guidance System

Abstract

Deployable mechanism has received more attention in the medical field due to its simple structure, dexterity, and flexibility. Meanwhile, the advantages of the Magnetic Anchoring and Guidance System (MAGS) are further highlighted by the fact that the operators can remotely control the corresponding active and passive magnetic parts in vivo. Additionally, MAGS allows the untethered manipulation of intracorporeal devices. However, the conventional instruments in MAGS are normally rigid, compact, and less flexible. Therefore, to solve this problem, four novel deployable tubular mechanisms, Design 1 (Omega-shape mechanism), Design 2 (Fulcrum-shape mechanism), Design 3 (Archway-shape mechanism), and Design 4 (Scissor-shape mechanism) in this paper, are proposed integrated with MAGS to realize the laser steering capability. Firstly, this paper introduces the motion mechanism of the four designs and analyzes the motion characterization of each structure through simulation studies. Further, the prototypes of four designs are fabricated using tubular structures with embedded magnets. The actuation success rate, the workspace characterization, the force generation and the load capability of four mechanisms are tested and analyzed based on experiments. Then, the demonstration of direct laser steering via macro setup shows that the four mechanisms can realize the laser steering capability within the error of 0.6 cm. Finally, the feasibility of indirect laser steering via a macro-mini setup is proven. Therefore, such exploration demonstrates that the application of the deployable tubular mechanisms integrated with MAGS towards in vivo treatment is promising.