Abstract
In this study, we aimed to systematically optimize the operating parameters in the degradation and mineralization of tetracycline by Fenton process. For this purpose; optimum values were found for Fe2+ concentration, H2O2 concentration and pH, reaction time, sedimentation times which are effective operating parameters in Fenton process. In this study where initial tetracycline concentration was used as 100 mg/L; optimum values were found as 4 for pH, 30 mg/L for Fe2+ concentration, 100 mg/L for H2O2 concentration and 10 min for reaction time and 90 min for sedimentation time. Under these conditions, the TC degradation was 100%, while the COD removal efficiency was approximately 94%. As a result of kinetic studies, BMG is the most suitable kinetic model in terms of tetracycline degradation, while it is seen that the most suitable kinetic model for tetracycline mineralization in terms of COD is the first-order kinetic model. The cost of removing 1 kg of tetracycline from the unit costs of chemicals and energy used in the Fenton process was found to be 1.527$.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
