Deformation mechanism and limit support pressure of cutting steel plate during connection between pipes in large spacing using pipe curtain structure method

Abstract

The pipe curtain structure method (PSM) is a novel construction method to control ground deformation strictly. Compared with the traditional pipe-roofing and pipe jacking method, the connection between pipes in large spacings using PSM is widely acknowledged as a unique construction procedure. Further study on this connection procedure is needed to resolve similar cases in that the pipes are inevitably constructed on both sides of existing piles. Cutting the steel plate during the connection procedure is the first step, which is crucial to control the safety and stability of the surrounding environment and existing structures. The deformation mechanism and limit support pressure of the cutting steel plate during the connection between pipes in large spacings are studied in this paper, relying on the undercrossing Yifeng gate tower project of Jianning West Road River Crossing Channel in Nanjing, China. A modified 3D wedge-prism failure model is proposed using the 3D discrete element method. Combined with Terzaghi loose earth pressure theory and the limit equilibrium theory, the analytical solutions for the limit support pressure of the excavation face of the cutting steel plate are derived. The modified 3D wedge-prism failure model and corresponding analytical solutions are categorised into two cases: (a) unilateral cutting scheme, and (b) bilateral cutting scheme. The analytical solutions for the two cases are verified from the numerical simulation and in-situ data and compared with the previous solutions. The comparative analysis between the unilateral and bilateral cutting schemes indicates that the bilateral cutting scheme can be adopted as a priority. The bilateral cutting scheme saves more time and induces less ground deformation than the unilateral one due to the resistance generated from the superimposed wedge. In addition, the parametric sensitivity analysis is carried out using an orthogonal experimental design. The main influencing factors arranged from high to low are the pipe spacing, the cutting size, and the pipe burial depth. The ground deformation increases with the increased cutting size and pipe spacing. The pipe burial depth slightly affects the ground deformation if the other two factors are minor. Cutting steel plates in small sizes, excavating soil under low disturbance, and supporting pipes for high frequency can effectively reduce the ground surface subsidence.