Abstract
As one of the all-inorganic perovskites, cesium lead mixed-halid perovskite (CsPbIBr2) has a bright photovoltaic application prospect owing to its ambient stability, appropriate bandgap, and distinctive color. However, the defect states in grain boundaries and the surface of CsPbIBr2 polycrystalline film lead to nonradiative carrier recombination which subsequently reduces the open-circuit voltage (VOC) and final power conversion efficiency (PCE) of the corresponding perovskite solar cells (PSCs). In this work, polyethylene glycol (PEG) is used to passivate the defect states of pure CsPbIBr2 film by improving the film morphology and coverage. The best-performance PSC based on PEG-passivated CsPbIBr2 exhibits a VOC of 1.28 V, a short-circuit current (JSC) of 8.80 mA cm–2, a fill factor (FF) of 0.649, and a PCE of 7.31%. However, the reference best-performance device based on pure CsPbIBr2 shows an inferior PCE of 6.36% with a lower VOC of 1.10 V, a comparable JSC of 8.81 mA cm–2, and a similar FF of 0.656....
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.