Abstract
In this study, pure Cu1-xSrxCr2O4/GO nanoparticles were successfully synthesized via a simple precipitation route followed by calcination at 70 °C for 2 h, resulting in a high-performance supercapacitor nanoelectrode material. Characterization techniques confirmed the formation and properties of the synthesized materials. X-ray diffraction (XRD) analysis revealed the crystalline structure of the nanocomposite, with the d-spacing value of GO changing to 7.6 Å and the presence of peaks indicating the Cu1-xSrxCr2O4 phase. The average crystalline sizes were found to be 13.5 nm for GO, 16.15 nm for CuCr₂O₄, and 21.2 nm for the Cu1-xSrxCr2O4/GO nanocomposite. Scanning electron microscopy (SEM) demonstrated the highly porous nature of the samples, with average grain sizes of 30 nm, 25 nm, and 27.4 nm for GO, CuCr₂O₄, and Cu1-xSrxCr2O4/GO, respectively. Elemental analysis using energy-dispersive X-ray spectroscopy (EDS) confirmed the presence of copper, chromium, and oxygen, along with minor impurities. Raman spectroscopy indicated an increased defect density in the Cu1-xSrxCr2O4/GO nanocomposite, with an ID/IG ratio of 1.57 compared to 1.01 for GO. Photoluminescence (PL) analysis showed a bandgap of 3.65 eV for GO and 2.49 eV for the Cu1-xSrxCr2O4/GO nanocomposite. Electrochemical characterization included electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The EIS analysis showed that the Cu1-xSrxCr2O4 /GO nanocomposite had a lower charge transfer resistance (Rct) of 1.29 Ω compared to GO and CuCr2O4, indicating higher conductivity. The maximum specific capacitance of the Cu1-xSrxCr2O4 /GO nanocomposite was 1935.8 F/g at a scan rate of 3 mV/s in 1 M KOH electrolyte, significantly higher than that of GO alone (480.190 F/g). This study demonstrates the potential of Cu1-xSrxCr2O4/GO nanocomposites as efficient supercapacitor electrode materials, showcasing enhanced capacitance and conductivity due to the synergistic effects of the components.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
