Abstract
Chlorofluorocarbons (CFCs) have been widely used in the printed circuit board industry for many decades. However, the growing concern regarding their ozone depleting properties has demanded a ban on these solvents and consequently brought forth the search for environmentally friendly alternatives. In printed circuit board technology, methyl chloroform and methylene chloride have been widely utilized as solvents for developing and stripping, respectively, radiation sensitive materials useful in creating fine line circuitry patterns. The solubility of unexposed and exposed T168 resist in selected solvents or solvent mixtures at various temperatures is described here. Results addressing the ease of removal of such solvent based resists using environmentally friendly alternatives are presented. Debonding of the polymer layer from the underlying substrate was observed by monitoring the deflection of the composite strip immersed in the solvent using a Fotonic Sensor accessory. Debonding time, identified as the necessary time to remove the photoresist from such surfaces, can vary with temperature, solvent, photoresist type or thickness, and exposure energy. © 1996 John Wiley & Sons, Inc.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.