DC surface flashover characteristics of ZnO/Epoxy composites at room temperature and 77 K

Abstract

Epoxy (EP) resin based nano-composites are widely used in high voltage direct current (HVDC) high temperature superconducting (HTS) power cable. In this paper, the DC surface flashover characteristics of ZnO/EP composites were studied at both room temperature and 77 K. The samples were made by dispersing ZnO nano-particles into EP resin with various weight percentages of 0%, 1%, 3%, 6% and 10%, respectively. The experiments were carried out with a cryogenic system in which DC high voltages ranging from 0 kV to 100 kV were supplied. The results showed that the surface flashover voltages increased with the increase of ZnO content at both room temperature and 77 K, and the surface flashover voltages at 77 K were higher than that at room temperature for composites with the same ZnO content.