Abstract
Real 3D display applications require RGB light sources which provide a spectral bandwidth of less than 5 MHz for recording (and playing-back) a holographic film. Furthermore, these emitters must be small in size, efficient, robust and reliable. Therefore, diode lasers with internal wavelength filters are the devices of choice. In our paper, we will present a further development of our red-emitting distributed Bragg reflector ridge waveguide laser (DBR-RWL). DBR surface gratings are implemented into the 2 mm long RWL by BCl<sub>3</sub>-Ar reactive ion etching. This fabrication process uses a single-epitaxy and is hence industry-compatible. At a heat sink temperature of 15°C the DBR-RWL provides 120 mW of optical output power in longitudinal single mode emission. Heterodyne linewidth measurements of two identical DBR-RWL show a FWHM linewidth of less than 2 MHz. The excellent beam quality (M<sup>2</sup> = 1.1) enables the use of these chips for play-back of holographic films or as master oscillators in a future micro-integrated master oscillator power amplifier configuration for recording.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
