Abstract
Abstract CuYb0·5Fe1.5O4 nanoferrite adsorbent was prepared and characterized with analytical techniques i.e. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersion spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). Until now, little information is available on the competition mechanisms to explain the complex multiple pollutant adsorption by ytterbium doped nanoferrites. A central composite design (CCD) was used to optimize the adsorption process variables, adsorbent mass (0.004–0.03 g), sonication time (2–6 min), initial metal ion concentration (4–30 mg L− 1) and initial dye concentration (7–20 mg L− 1). The CCD results were analyzed for the significant variables and interaction effect on the adsorption performance of CuYb0·5Fe1.5O4 nanoferrite adsorbent. The best response of the present adsorption system was achieved at optimum adsorbent dose (0.02 g), sonication time (4 min), methyl orange (MO) conc. (20 mg L− 1), safranin O (SO) conc. (10 mg L− 1), Cr3 + conc. (40 mg L− 1) and Pb2 + conc. (35 mg L−). The results indicate that the R2 values were > 0.987, while the adjusted R2 values are in close agreement with R2. The quadratic model optimal conditions for MO, SO, Pb2 + and Cr3 + ions yielded 99.44%, 95.65, 82.5 and 100% removal efficiency respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call