Abstract
Construction wastes have become the major source of solid wastes in Hong Kong. Thousands of tonnes of solid wastes are produced every year from construction and demolition activities. Increasing generation of these wastes has caused significant impacts on the environment and aroused growing public concerns. Therefore, the minimisation of construction wastes has become a pressing issue. This paper aims to: 1) reveal the status of construction wastes; 2) investigate the effectiveness of prefabrication in terms of waste reduction in replacing traditional wet-trade practices; 3) examine the factors that help minimize construction wastes by the adoption of prefabrication; and 4) explore the current waste reduction situations after adoption of prefabrication by comparing with in-situ construction. It investigates wastes generated from various wet-trade construction activities such as in-situ concreting, timber formwork, bricklaying, plastering, screeding, tiling, rebar fixing and bamboo scaffolding. Six major reasons for the excessive construction wastage are known to be: 1) cutting; 2) over ordering; 3) damaging during transportation; 4) losing during installation; 5) poor workmanship; and 6) change of design. From the findings of a structured interview survey of thirty-one construction practitioners, “timber formwork” is found to be having the greatest potential for cutting scrap, and wastes from “poor workmanship” can be greatly reduced by adopting prefabrication in construction. Furthermore, after the adoption of prefabrication, wastage generation can be greatly reduced in various wet-trade activities including concreting, rebar fixing, bricklaying, drywall, plastering, screeding and tiling. Especially in plastering, the waste reduction can be reduced by 100%. It is concluded that prefabrication of building components is one of the effective technologies of waste minimisation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.