Abstract
AbstractWe had prepared PdxCoy/C and PdxCuy/C nanocatalysts with different actomic ratio of Pd and Co or Cu via modified sodium borohydride reduction method and investigated their electrocatalytic properties for hydrogen peroxide (H2O2) reduction reaction with emphases on the effects of composition and structure. The activities of PdxCoy/C and PdxCuy/C catalysts increased firstly and then decreased with the amount of Pd adding. Both the Pd8Co/C and Pd8Cu/C showed the better catalytic performance than that of the other Pd and Co or Cu atomic ratio. The Pd8Co and Pd8Cu NPs were 3–4 nm in size and uniformly distributed on the C surface in an alloy way. The Pd8Co/C and Pd8Cu/C catalysts exhibited a superior activity and stability on H2O2 electroreduction reaction than the Pd/C and the commercial Pd/C (JM) catalysts, which due to Co and Cu enter into the Pd lattice and alter the electronic structure of Pd. The Mg‐H2O2 semi‐fuel cells with the two catalysts supported on the carbon paper as the cathodes expressed a peak power density of 140 mW cm−2 for the Pd8Co/C cathode and 168 mW cm−2 for the Pd8Cu/C cathode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.