Abstract
The crystallographic orientation dependence of the stability of retained austenite against deformation-induced martensitic transformation in 0.6%C alloyed steel was studied. A bainite structure with about 40% volume fraction of retained austenite was successfully obtained by austempering. Tensile testing at room temperature revealed a high strength of 1.3 GPa with adequate elongation. A change in texture of retained austenite brought about by tensile deformation to several strains was measured. Deformation-induced martensitic transformation occurred in grains with the tensile axis nearly parallel to fcc was significantly stabilized. The orientation dependence of the martensitic transformation was compatible with that of the {1-11}fcc fcc shear deformation which can be regarded as the first primitive process for the martensitic transformation as proposed by Bogers and Burgers. This compatibility is discussed in terms of the elastically normalized Schmid factor for the transformation dislocation to act for the lattice change.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call