Abstract
A series of Fe40Co40Zr8M2B10 (M=Nb, V, Cr, Ti, W, Al) alloys were prepared using melt-spinning. The thermal curve, structure and magnetic property of alloys are examined. Because of different negative heat of mixing between elements, only Fe40Co40Zr8M2B10 (M=Nb, V, Cr, Ti) alloys form amorphous structure. These amorphous alloys are annealed at different temperatures under vacuum conditions. The crystallization processes of four amorphous alloys are similar. In the primary stage of crystallization process, only α-Fe(Co) phase precipitates and Co element mainly distributes in the residual amorphous. For the four alloys after annealing at 550°C, there is a few differences in saturation magnetization (Ms) and coercivity (Hc) due to their different microstructures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
