Abstract
Graphene has been the subject of an extraordinary upsurge of interest due to its intriguing properties and potential applications. Recent work has shown that excellent electronic properties are exhibited by large-scale ultrathin graphite films, grown by chemical vapor deposition on a polycrystalline metal and transferred to a device-compatible surface. The properties of such multilayered graphene films could depend strongly on film thickness and uniformity. Unlike the other common methods for analysis in the literature, cross-sectional transmission electron microscopy (TEM) would provide direct, straightforward analysis of film thickness and quality, as well as provide a means to investigate specific defect structures (e.g. wrinkles). However, this approach has not often been pursued due to the sensitivity of graphite to the electron and ion beam damage in such a procedure. Here, an approach to creating cross-sectional TEM samples using a focused ion beam lift-out method is presented, along with the resulting TEM images of thin graphite films and several wrinkle defects. Samples removed from as-grown films on polycrystalline nickel and films removed from measured devices are presented. The benefits and limitations to this approach are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have