Abstract
The results and analyses presented are from the latest series of experiments in a continuing program for determining the critical parameters of plutonium mixtures having concentrations typical of wet powders, precipitates, slurries, and polymers. Previous measurements in this program were made on 15 H/Pu fuel having 240Pu isotopic concentrations of 2.2 and 8.08 wt% and on 5 H/Pu fuel having a 240Pu isotopic concentration of 11.46 wt%. This latest series of experiments was conducted with fuel in which the 240Pu isotopic content has been increased to 18.35 wt% and the H/Pu atomic ratio decreased to essentially zero. The minimum critical slab thickness for a water-reflected homogeneous PuO2-water system of this composition was determined to be 2.31 ± 0.06 cm as compared to only 1.15 ± 0.03 cm for Pu-water. Thus, having the plutonium in an oxide form at this degree of moderation results in an increase of about a factor of 2 in the critical thickness. For spherical geometry, the difference in critical mass bet...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
