Creep resistance of similar and dissimilar weld joints of P91 steel

Abstract

Two experimental weld joints, a similar weld joint of 9Cr–1Mo steel and a dissimilar weld joint of 9Cr–1Mo and 2.25Cr–1Mo steels, were fabricated by the TIG+E method and post-weld heating was applied. Creep testing was carried out at temperatures ranging from 525 to 625°C in the stress range 40–240 MPa. Creep rupture strength was evaluated using the Larson–Miller parameter. Extended metallography including transmission electron microscopy was performed and critical zones were indicated where fractures were concentrated during the creep exposure. At high temperatures rupture of the dissimilar weldment occurred in the heat affected zone (HAZ) of the weld metal while rupture of the similar weldment was located in the HAZ of the parent material. The processes of recovery seem to be the main causes of decrease in creep rupture strength of both weld joints in comparison to the parent materials.