Abstract
This is the second paper in a series of three papers generated from a recent study on crack-opening-area analysis of circumferentially cracked pipes for leak-before-break applications. This paper (Part II—Model Validations) focuses on the evaluation of current analytical models, discussed in the first paper (Part I—Analytical Models) as well as finite element models for conducting crack-opening-area analyses of pipes with circumferential through-wall cracks. The evaluation was performed by direct comparisons of the predicted results with the test data from full-scale pipe fracture experiments. The results from 25 full-scale pipe fracture experiments, conducted in the Degraded Piping Program, the International Piping Integrity Research Group Program and the Short Cracks in Piping and Piping Welds Program, were used to verify the analytical models. The main objective was the evaluation of engineering analysis procedures (estimation methods) as well as the ability of the finite element method to predict crack-opening displacements and shapes in pipes with circumferential through-wall cracks. Statistics were developed to quantify the accuracy of the current predictive models. A wide variety of pipe fracture tests involving cracks in base metals, weld metals and bimetallic weld metals were analyzed. Pipes containing both simple through-wall cracks and complex cracks were evaluated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Pressure Vessels and Piping
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.