Abstract
In deep coal mines, coal before the working face is subjected to coupled high mining-induced stress and gas pressure. Such condition may facilitate crack formation and propagation in the coal seam, leading to serious coal and gas disasters. In this study, the mechanical properties (i.e., uniaxial compressive strength, tensile strength, and fracture toughness) of gas-containing coal with four levels of initial gas pressure (i.e., 0.0, 0.5, 1.0, and 1.5 MPa) were investigated by uniaxial compression, Brazilian disc, and notched semicircular bending loading test. A newly developed gas-sealing device and an RMT-150 rock mechanics testing machine were used. Fracture modes under different initial gas pressures were also determined. A theoretical method of fracture mechanics was used to analyze crack initiation characteristics under gas adsorption state. Results show that the uniaxial compressive strength, tensile strength, and fracture toughness of gas-containing coal decreased with increasing initial gas pressure. The tensional fracture occurred in gas-containing coal under uniaxial compressive loading with high gas pressure. Cracks in gas-containing coal propagated under small external loads due to the increase in effective stress of crack tip and decrease in cracking strength. This study provided evidence for modifications of the support design of working face in deep coal mines. Furthermore, the correlations between fracture toughness, compressive strength, and tensile strength of gas-containing coal were investigated.
Highlights
With the increase in the mining depth of coal mines in eastern China, the geological and mechanical environments of deep mines differ from those of shallow mines
The results of previous experiments show that shear failure is the main form of sample failure in uniaxial compression (UC) test, and tensile failure is the main form in Brazilian disc (BD) and NCSB loading test
The experimental results are verified by the theoretical analysis of crack initiation characteristics based on fracture mechanics
Summary
With the increase in the mining depth of coal mines in eastern China, the geological and mechanical environments of deep mines differ from those of shallow mines. A large number of in situ investigations and numerical simulations have demonstrated that the primary cracks in coal seam before the working face will grow and generate new cracks under high mining-induced stress, and the state of adsorbed gas in the coal seam will change; the direct consequence is that the working face is prone to coal and gas outburst accidents [1,2,3]. Such dynamic accidents are strong and sudden, which can be destructive and seriously threaten the production of coal mines. The mining-induced stress is obvious on high-gas
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
