Abstract
Considerable interest has been expressed recently in the scattering of a plane acoustic wave by an elastic structure. In this paper, a method that couples the finite element method and a boundary element method is proposed. A finite element code (ATILA) is used to model the elastic structure and a boundary element code (EQI) to describe the propagating waves in the infinite fluid medium surrounding the body. The analysis is performed in three steps for each frequency: (i) the effect of the fluid is characterized by a nodal impedance matrix using BEM, (ii) the analysis of the structure using FEM including fluid effects via the impedance matrix provides the displacement field, (iii) from these displacements, the near-field and far-field pressures are obtained using BEM. The method is successfully applied to the scattering by spherical shells of various thicknesses for ka varying from 0 to 15 (k is the acoustic wave number in the fluid and a is the external radius of the sphere). The advantages of the method (analysis of complex geometries with various materials, direct knowledge of the displacement field, exact description of Sommerfeld’s radiation condition) and its drawbacks (irregular frequencies associated with BEM, limitation to medium values of ka) are discussed. [Work supported by D.R.E.T. Paris.]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.