Coupled DEM/CFD analysis of impact of free water on the static and dynamic response of concrete in tension regime

Abstract

Listen

Translate article

In this paper, the quasi-static and dynamic behavior of partially fluid-saturated concrete under two-dimensional (2D) uniaxial tension at the mesoscale is investigated numerically. It was calculated what effect the free pore fluid content (gas and water) had on the fracture process and strength of concrete in a tension regime. An improved pore-scale hydro-mechanical model based on DEM/CFD was used to simulate the behavior of fully and partially fluid-saturated concrete in quasi-static and dynamic conditions. The foundation of the fluid flow idea was a network of channels in a continuous area between discrete elements. In very porous, partially saturated concrete, a two-phase laminar fluid flow was proposed. To track the liquid/gas content, the position and volumes of the pores and cracks were considered. Numerical simulations of bonded granular specimens of a simplified spherical mesostructure that resembled concrete were carried out under dry and wet circumstances for two different strain rates. Investigations were conducted on the effects of fluid pore pressures, fluid saturations, and fluid viscosities on the strength and fracture process of concrete. The quasi-static tensile strength dropped nonlinearly with increasing fluid saturation and fluid viscosity during fluid migration through pores and cracks which contributed to a promoted fracture process. However, during rapid dynamic tensile deformation, a fracture process attenuated due to a fluid migration constraint from insufficient time to exit the pores. It caused the dynamic tensile strength to rise nonlinearly as fluid saturation and fluid viscosity increased.