Abstract

The purpose of this work was to study different ways to mitigate alkali-related problems during combustion of biomass in circulating fluidized beds. Wood chips and wood pellets were fired together with straw pellets, while the tendency to agglomerate and form deposits was monitored. In addition to a reference case, a number of countermeasures were applied in related tests. Those were addition of elemental sulphur, ammonium sulphate and kaolin to a bed of silica sand, as well as use of olivine sand and blast-furnace slag as alternative bed materials. The agglomeration temperature, composition and structure of bed-ash samples were examined. The flue-gas composition, including gaseous alkali chlorides, was measured in the hot flue gases and in the stack. Particles in the flue gas were collected and analysed for size distribution and composition. Deposits were collected on a probe in hot flue gases and their amount and composition were analysed. Addition of kaolin was found to be the best method to counteract the agglomeration problem. The deposition problem is effectively counteracted with addition of ammonium sulphate, while kaolin is too expensive to be used commercially against deposits, and sulphur is less effective than ammonium sulphate.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.