Cost and Emission Optimization in Power Plant Using the Single Echelon Economic Dispatch Model (SEED)

Abstract

The electricity supply chain system consists of power plants, transmission and distribution. Differences in power plant characteristics cause differences in fuel costs and emissions. Inaccuracies in scheduling the plant have an impact on the surge in fuel use. This becomes the basis for the optimization of power plant scheduling. Optimization on the generator side is usually using the economic dispatch model. However, the Economic Dispatch Model does not consider optimization on the transmission network. Optimization on the transmission network is needed because there are losses in the transmission network. Losses will be even greater when the distance between the power plant and the customer is getting further away. So if distance can be minimized, fuel costs can be reduced. Minimizing the distance for shipping goods can use the transportation model, but the transportation model cannot be used for electricity distribution. This is because there are differences between goods and electricity. Therefore, this study proposes the Single Echelon Economic Dispatch (SEED) model. This model is a combination of the economic dispatch model and the transportation model. This model is able to do simultaneous optimization between the generator side and the transmission side. The model is applied to the Mahakam system in East Kalimantan, using all PLN’s power plants. Load consists of two types, namely low load and peak load. As a result, in peak load and low load conditions, the P11 power plant produces the biggest losses and emissions. This is because electricity production in P11 has to go through a longer path compared to other plants. The P11 is also a power plant that requires the highest fuel costs