Abstract
Abstract This paper regards the corrosion protection performance of High Performance Fiber Reinforced Cement Composites (HPFRCC) as a repair material. For the purpose of improving workability, the volumetric fiber content in HPFRCC was decreased from its usual rate of 1.5% to as low as 0.75%. The applicability of HPFRCC as a repair material for preventing steel corrosion was investigated using specimens that simulated either surface coating repair or patch repair. The results can be summarized as follows: Patch repair with HPFRCC to depths beyond the backside of the reinforcement effectively suppressed chloride penetration and prevented reinforcement corrosion, whereas surface coating with HPFRCC could not prevent corrosion of the steel in the RC substrate. As long as the fiber content is set so that only fine cracks are formed under service conditions, differences in fiber content did not affect the corrosion preventing performance of HPFRCC as a repair material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
