Abstract
This paper describes a case study of corrosion of post-tensioning strands in segregated grout that led to failure of one of the external tendons of a bridge after less than 2 years from the construction. Unexpectedly, severe corrosion attacks took place in areas where the ducts were filled by the injection grout, but segregation of the grout led to the presence of an unhardened whitish paste. A detailed inspection of the failed tendon, as well as other tendons removed afterwards, showed that corrosion occurred mainly in the inclined parts of the external post-tensioning tendons, in the presence of whitish grout. Analysis on samples of segregated grout showed that it was highly alkaline and had a high content of sulphate ions, but was free of chloride ions, excluding thus the normal causes of corrosion of steel in cement-based materials. Microstructural analysis of failed wires also excluded the failure for hydrogen embrittlement.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
