Abstract

The authors compare the magnetic resonance (MR) phase contrast flow velocity measurements in varying concentric stenoses with invasive measurements obtained with a Doppler guidewire. Flow velocity measurements were obtained using a calibrated 0.018 inch 12 MHz Doppler guidewire and a 1.0 T MR imaging system in a pulsatile hydraulic model with variable arterial stenoses. Velocity measurements were performed proximal, intrastenotic, and distal to the stenoses. The cross-sectional area of stenosis was calculated from the data of both methods. For MR imaging measurements, fast low-angle shot two-dimensional phase contrast sequences with different velocity encodings were used. Phase contrast flow measurements correlated well (r = 0.95, Pearson) with Doppler guidewire-based flow velocity data. Generally, flow velocities obtained with MR imaging were lower when compared with the Doppler-based data (P < or = 0.001, Wilcoxon matched pairs test). However, the ratios and the calculated cross-sectional area of stenoses showed a high correlation (r = 0.96) with the predefined area of stenoses. The assessment of flow alterations in vitro due to variable stenoses using MR phase contrast flow measurements is very well correlated with the Doppler guidewire. Consequently, these results required in vivo measurements of atherosclerotic lesions to evaluate the clinical impact.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.