Abstract
ABSTRACT Fibre-reinforced polymers are increasingly used due to their high specific strength, making them suitable for local sheet metal reinforcement. This allows improved overall mechanical properties with reduced wall thickness of the sheet metal part and, thus, lower weight of the components. One of the main focuses of research into such hybrid structures is on the adhesive properties and the respective failure behaviour of the interfaces. Generally, the failure behaviour under the influence of mechanical loads can be divided into adhesive, cohesive and mixed-mode failure. The correlation between observed failure behaviour and adhesion properties of the hybrid composite materials is analysed in detail in this work. The hybrid composite consists of an aluminium sheet of the alloy EN AW‑6082 T6 and thermoset carbon fibre-reinforced plastic (CFRP) prepreg. The aluminium sheet was laser pretreated before hybrid production to improve the adhesion properties. The specimens studied were produced by the prepreg pressing process, in which the components are cured and joined simultaneously. The influences of the thickness of the CFRP part, the layup, the fibre orientation at the boundary layer, and the laser pretreatment parameters on the properties of the hybrid joints were investigated.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call