Abstract
In this work, facilitated transport supported ionic liquid membranes (SILMs) were prepared with the room temperature ionic liquid (RTIL) 1-hexyl-3-methylimidazolium chloride ([hmim][Cl]) and the cuprous chloride (CuCl) copper(I) salt to perform the selective separation of CO from N2. Previously, we reported that this solute-carrier system provides large CO/N2 solubility selectivity due to the reversible formation of a CO–copper(I) complex. The RTIL was impregnated in a porous PVDF membrane and pure and mixed gas permeation experiments were performed with continuous gas flow at constant pressure. The effects of different operating conditions were tested, namely pressure, temperature, sweep gas flow rate and liquid membrane composition. The CO permeability through the copper(I)-based SILMs increases with respect to pure [hmim][Cl]–SILMs owing to the CO carrier-mediated transport. On the contrary, the N2 flux is not affected, and therefore, the CO/N2 selectivity is increased. The CO transport through the reactive SILMs is enhanced at higher temperatures and copper(I) concentration. However, mixed gas experiments revealed a slight decrease of CO/N2 selectivity. Regarding membrane stability, SILMs were continuously operated for two weeks without any loss of performance. Additionally, gas diffusion coefficients (~10−10m2s−1) and solute-carrier complex diffusivity (~10–11m2s−1) were calculated in the RTIL media.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
