Abstract
Experimental samples of steel-copper and copper composite conductors, including those from copper waste, were obtained according to the developed technology. The physical and operational properties of the copper composite material were investigated, special attention was paid to the wear resistance, which was tested as part of the working pantograph of the electric train, and the electrical conductivity of the obtained copper composite was investigated. It is shown that the electrical conductivity of the composite material made of copper is higher in the range of operating temperatures of the pantograph, and the wear resistance is much higher than that of the sample made of standard copper material.
Highlights
Получены экспериментальные образцы сталемедного и медного композиционного проводника в том числе и из отходов меди по разработанной технологии
The physical and operational properties of the copper composite material were investigated, special attention was paid to the wear resistance, which was tested as part of the working pantograph of the electric train, and the electrical conductivity of the obtained copper composite was investigated
It is shown that the electrical conductivity of the composite material made of copper is higher in the range of operating temperatures of the pantograph, and the wear resistance is much higher than that of the sample made of standard copper material
Summary
Получены экспериментальные образцы сталемедного и медного композиционного проводника в том числе и из отходов меди по разработанной технологии. Исследованы физические и эксплуатационные свойства медного композиционного материала, особое внимание обращено на износостойкость, которую проверили в составе рабочего пантографа электрички, исследовали электропроводность полученного медного композита. Что электропроводность композиционного материала из меди выше в области рабочих температур пантографа, а износостойкость значительно выше, чем у образца из стандартного медного материала. Анализ публикаций по математическому моделированию процесса формирования непрерывнолитой, как и полунепрерывнолитой медной заготовки свидетельствует об их разнородности и немногочисленности, а наличия моделей описания процесса затвердевания сталемедной заготовки, получаемой в процессе взаимодействии расплава меди со стальной вставкой не выявлено.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.