Controlling the electrocatalytic activities of conducting polymer thin films toward suitability as cost-effective counter electrodes of dye-sensitized solar cells

Abstract

Role dopant anions and solvents in electropolymerized conducting polymers (CPs) on controlling the morphology of thin films and electrocatalytic activities to judge their suitability as low-cost counter electrodes (CE) of dye-sensitized solar cells ( DSSCs) was systematically investigated. Amongst various CPs such as polyaniline (PANI), polypyrrole (PPy), and PEDOT with sodium dodecyl sulfate (SDS) as a dopant, PEDOT was found to exhibit the best photovoltaic performance with a photoconversion efficiency (PCE) of 6.99 %. This was attributed to the best electrocatalytic activity due to the smallest ΔEp, most minor R1, and nano-morphology-assisted high surface area, as confirmed by CV, EIS, and FE-SEM investigations. Using PEDOT as CP, the nature of dopants such as SDS, TFSI, and ClO4 has also been found to control the electrocatalytic activities and the morphology of the fabricated thin films affecting overall photovoltaic performance DSSCs. Amongst the various CP-based CE fabricated using different dopants and solvents, PEDOT:TFSI thin films prepared in acetonitrile solvent and used as CE exhibited not only the best electrocatalytic activity as CE but also demonstrated the best photovoltaic performance with PCE of 7.0 %, which almost similar to that of DSSC utilizing Pt as CE with PCE of 7.1 %. Therefore, it was concluded that the nature of CP and dopant ions were vital factors in governing the electrocatalytic activities of the thin films to ensure their suitability as CE for optimal functioning and controlling the DSSC performance.