Controlled two-pulse generation in Q-switch mode from a single laser using Q-modulator with frustrated total internal reflection

Abstract

In this work a cavity design for double-pulse generation in Q-switched mode from a single laser is proposed, based on the construction of a second laser channel using a FTIR (frustrated total internal reflection) Q-modulator. A time interval between the two pulses from 500 ns to 120 μs is obtained in a Nd:YAG laser. A comparison with other methods and cavity designs for double-pulse generation is presented. The case when this technique is applied on a tunable laser with metastable upper laser level (Cr:LiCAF, Cr:LiSAF, Alexandrite, Co:MgF2 or other) is also considered. Even though the method presented in the paper does not rely only on the cavity configuration proposed, some advantages can be obtained – both polarization and wavelength-independent tuning without polarization and wavelength restrictions in combination with the possibility of different wavelengths and polarizations in each pulse. Moreover, by using an active medium generating wavelengths around and up to 3 μm, the Pockels-cell-Q-switch optical transmission problems can be avoided.