Abstract
HfO2 thin films have been deposited onto p-Si(100) substrates by atomic layer deposition (ALD) using Cp2Hf(CH3)2 (Cp = cyclopentadienyl) and water as precursors at 300–500 °C. Processing parameters were optimised and the ALD type growth mode corroborated at 350 °C where a deposition rate of 0.42 A cycle−1 was obtained. The crystallinity, morphology and chemical composition of the deposited films were characterised. Films deposited at 300–450 °C were polycrystalline with monoclinic (−111) as the preferred orientation. Impurity levels of the stoichiometric HfO2 films deposited at 350 and 400 °C were very low, or below 0.4 and 0.25 atom% for carbon and hydrogen, respectively. In addition, ultrathin HfO2 films showed good dielectric properties such as low hysteresis and nearly ideal flatband voltage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.