Control System of Fish Feeding Devices in Actual Pond

Abstract

The main objective of this project is to identify the development of PLC and movement control system providers to eat in wireless cable. Further the second objective is to develop a conveyor system for delivery of food to the system cable feed providers and the final objective is to develop a PLC system and a wireless control system. Components required in this project can be divided into two groups which are electrical components and mechanical components. For this research, some components are required and divided into two groups which the electrical components and mechanical components. The total average weight of pallet conveyors operate to fall during the first 5 minutes is a 286.67 grams, followed by 10 minutes is a 467.78 grams, 15 minutes is a 665.56 grams, last 20 minutes is a 860 grams and the last 25 minutes is a 964.45 grams. The average an increase was due to the time factor and heavy pallet that fell during the process. Then the average results for each test height of the cable before and after process run is taken and graphs drawn. For test average before the process run at station 1 and station 4 is 0.2371 meters followed by station 2, 3, 5 and station 6 is 0.1863 meters. After that, the test run average after the process for station 1 and station 4 is 1177 meters followed station 2, 3, 5 and station 6 is 1.1269 meters. The graph decrease machine because food distribution heavy and less strong pillars to hold cable the support and supports the machine. To increases graphs was due to the bad weather and weight factors distribution of food machine. In summary, the control system of the fish food provider can be developed even more to advance the fishing industry particular in Malaysia and general in the world.