Control-Oriented Modeling of Wireless Power Transfer Systems With Phase-Shift Control

Abstract

This paper is concerned with control-oriented modeling of a class of wireless power transfer systems with a phase-shift-controlled inverter. Two methods are investigated: the analytical modeling method, which is based on physical laws, and the refined instrumental variable method, which is based on sampled data. It shows that the former provides physical insights into the system, and that the resulting models will be accurate if the true circuit component parameters are a priori known. Otherwise, the model accuracy may decline. By contrast, the latter provides a cheap solution for accurate modeling, based only on a set of sampled input–output data, and the resulting model can capture very well the dynamic behavior of the system within a defined operating range. In real applications, it is always hard to know the actual circuit component parameters, since they may drift from the nominal values, due to some reasons such as the aging of circuit components and the variation of coil placement, making the analytical modeling method not very accurate. Therefore, to preserve the virtues of both methods, it is suggested to use them as a combination, that is, using the analytical modeling method to determine the model structure while using the data-driven modeling method to estimate the model parameters. All results derived in this paper are verified by means of both numerical simulation and experimental validation.