Abstract
Piezoelectric transducers are commonly used as strain actuators in the control of mechanical vibration. One control strategy, termed piezoelectric shunt damping, involves the connection of an electrical impedance to the terminals of a structurally bonded transducer. When subject to deflection, charge generated in the transducer flows through the external impedance developing a counteractive voltage across the terminals. Many passive, nonlinear, and semiactive impedance designs have been proposed that maximize this counteractive effect. This paper introduces a new technique for the design and implementation of piezoelectric shunt impedances. By considering the transducer voltage and charge as inputs and outputs, the design problem is reduced to a standard linear regulator problem enabling the application of standard synthesis techniques such as LQG, H/sub 2/, and H/sub /spl infin//. The resulting impedance is extensible to multitransducer systems, is unrestricted in structure, and is capable of minimizing an arbitrary performance objective. Experimental comparison to a resonant shunt circuit is carried out on a cantilever beam. Previous problems such as ad hoc tuning, limited performance, and sensitivity to variation in structural resonance frequencies are significantly alleviated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have