Abstract
Different dosages of ferrous chloride and ferric chloride were added to digestors separately, and the volumes of methane and hydrogen sulphide contained in the digestor gas (biogas) were monitored. It was noted that the effects of adding of 16, 18 and 32 kg ferrous chloride/ tonne volatile solids, and 16 and 18 kg ferric chloride/tonne volatile solids were similarly effective in controlling the hydrogen sulphide levels. According to an average amount of undigested sludge (primary sludge mixed with surplus activated sludge) of 41 tonne volatile solids produced each day during the sewage treatment process in Shatin sewage treatment works, and the required dosage of 16 kg ferric chloride/ tonne volatile solids, the amount of iron salts required should be 656 kg/day or 3.3 mg/L for the actual application, based on an average sewage flow of 200,000 m3/day.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
