Control for chlorine resistant spore forming bacteria by the coupling of pre-oxidation and coagulation sedimentation, and UV-AOPs enhanced inactivation in drinking water treatment

Abstract

Spore forming bacteria (SFB) are strongly chlorine resistant. Their presence in drinking water may cause diseases and pose threat to public health. Three SFB strains, i.e. Bacillus alvei, Bacillus cereus, and Lysinibacillus fusiformis, were isolated and identified from the finished water of a drinking water treatment plant where bacteria colonies occasionally reached the limit value. Due to their chlorine resistance, a SFB control strategy coupling pre-oxidation, coagulation sedimentation, and UV-AOPs inactivation in water treatment process was studied in lab scale. Five minutes pre-oxidation treatment by applying Cl2 and ClO2 induced remarkable spore transformation. Longer pre-oxidation exposure time didn't have apparent improvement. Cl2 and ClO2 dosages of 0.9 mg/L and 0.5 mg/L were suggested, respectively. The formed spores can be efficiently removed by the following coagulation sedimentation treatment. At a suggested dosage combination of 20 mg/L PAC and 0.08 mg/L PAM, spore removal efficiency reached about 3.15-lg. Comparing to applying sole UV irradiation, enhanced UV inactivation by adding 0.1 mM H2O2, or Cl2, or peroxymonosulfate (PMS) substantially improved the inactivation of the most chlorine resistant SFB strain, Lysinibacillus fusiformis. UV-AOPs stably achieved 2-lg inactivation rate at UV dosage of 40 mJ/cm2. UV/H2O2, UV/Cl2 and UV/PMS inactivation kinetically enhanced 1.20 times, 1.36 times and 1.91 times over sole UV irradiation. Intracellular DNA and ATP leakages were detected, and remarkable damages of Lysinibacillus fusiformis cells’ surface and ultrastructure were observed. These findings evidenced cell wall and cell membrane destructions, guaranteeing substantial SFB cells inactivation. This study was carried out based on three SFB strains isolated from a finished water, and common engineering practical operations. By providing engineeringly relevant references, the outcomes obtained would be helpful for dealing with SFB outbreak risk in drinking water treatment.