Continuous/discontinuous finite element approximations of fourth-order elliptic problems in structural and continuum mechanics with applications to thin beams and plates, and strain gradient elasticity

Abstract

Listen

Translate article

A new finite element method for fourth-order elliptic partial differential equations is presented and applied to thin bending theory problems in structural mechanics and to a strain gradient theory problem. The method combines concepts from the continuous Galerkin (CG) method, the discontinuous Galerkin (DG) method and stabilization techniques. A brief review of the CG method, the DG method and stabilization techniques highlights the advantages and disadvantages of these methods and suggests a new approach for the solution of fourth-order elliptic problems. A continuous/discontinuous Galerkin (C/DG) method is proposed which uses C 0-continuous interpolation functions and is formulated in the primary variable only. The advantage of this formulation over a more traditional mixed approach is that the introduction of additional unknowns and related difficulties can be avoided. In the context of thin bending theory, the C/DG method leads to a formulation where displacements are the only degrees of freedom, and no rotational degrees of freedom need to be considered. The main feature of the C/DG method is the weak enforcement of continuity of first and higher-order derivatives through stabilizing terms on interior boundaries. Consistency, stability and convergence of the method are shown analytically. Numerical experiments verify the theoretical results, and applications are presented for Bernoulli–Euler beam bending, Poisson–Kirchhoff plate bending and a shear layer problem using Toupin–Mindlin strain gradient theory.