Abstract
A new true-time delay phase shifter concept is proposed exploiting the distributed Miller effect in coupled transmission lines. Simultaneous change in Miller capacitance and inductance controlled by a single analog voltage changes the propagation delay of a transmission line with constant input impedance and insertion loss. The true-time delay line feature of the proposed architecture accommodates a wide bandwidth signal without group delay distortion. A theoretical framework for understanding Miller inductance from voltage and current duality and the distributed Miller effect using coupled wave equations is presented. As a proof of concept, a four-stage tunable delay line with a high-speed phase modulation capability was fabricated in a 45-nm RF SOI CMOS process and occupies an active area of 0.28 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . The measured IC demonstrates a broadband tunable true-time delay with a measured group delay tuning range of 18 ± 1 ps from 11 to 24 GHz. The measured phase shift ranges are 173° and 182° with insertion losses of 10.6 ± 0.7 dB and 11.6 ± 1 dB at 28 and 30 GHz, respectively. The measured dc power consumption is 22 mW from a 1.2-V supply.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.