Continuous Extraction of Europium(III) by Ionic Liquid in the Rotating Disk Column with an Asymmetrical Structure Aimed at the Evaluation of Reactive Mass Transfer.

Abstract

In this study, the features of the solvent extraction technique were investigated to explore the potential of ionic liquid for extracting Eu(III) from aqueous solution. The transport process between the aqueous and organic phase was carried out in the rotating disk column with an asymmetrical structure and a continuous mode of operation. The utilization of Cyphos IL 104 as an ionic liquid in comparison with Cyanex272 extractant was evaluated for the extraction abilities in the recovering of Eu(III) under different conditions, including agitation speed, inlet aqueous, and solvent phase velocities. The degree of extraction and the mass-transfer rate were best when the agitation speed and the superficial velocities of aqueous and solvent phases were adjusted to 690 rpm, 0.831 mm/s, and 1.385 mm/s, respectively. The better efficiency was achieved using the ionic liquid with 0.02 mol/L concentration, 96.52% Eu(III) extraction in comparison to the same condition without the presence of ionic liquids with Cyanex272 (0.5 mol/L, 99.66%). With the analysis of the data, it was noted that the increase in the operating parameters has a positive influence on the holdup, degree of extraction, and mass-transfer rates. The percentage increase equal to 33.57% for overall mass-transfer coefficients was obtained with the increment of mixing in the column. The results showed that the mass transfer is associated with reactive resistance. The previous correlation did not explain the behavior of the system correctly in the reactive mode. Finally, the empirical models using the Sherwood number were developed to correlate the mass-transfer coefficient.