Abstract
The most challenging aspect of producing durable joints between titanium alloy and stainless steel (Ti/SS) is preventing the formation of brittle Ti–Fe intermetallic compounds, particularly the TiFe2 phase. In this paper, the interrupted pulsed arc welding (IPAW) was proposed to join TC4 and 304SS dissimilar metals. The joining mechanisms, microstructures and shear strength of the joints were investigated. The precise regulation of arc pulsed time in the millisecond range enabled the creation of a joint without the formation of the TiFe2 phase through contact reactive brazing. A Ti-rich reaction layer consisting of β-Ti and TiFe phases was formed in the brazing joint, and the shear strength of the joint reached 106.3 MPa. By increasing the arc pulsed current or time, the brazing joint was transformed into the fusion joint. The formation of two reaction layers was observed: Ti-rich phases (TiFe and β-Ti) near the TC4 and Fe-rich phases (TiFe2 and TiCr2) near the 304SS, which exhibited high brittleness. The presence of a high brittleness fusion zone resulted in immediate cracking post-welding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.