Construction, Application and Verification of a Novel Formaldehyde Gas Sensor System Based on Ni-Doped SnO2 Nanoparticles

Abstract

An efficient formaldehyde (HCHO) gas sensor system based on nickel-doped tin oxide (Ni-doped SnO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> ) nanoparticle sensor and back-end circuit has been developed. Ni-doped SnO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> nanoparticles are prepared by a simple one-step hydrothermal method. To complete the function of detecting HCHO gas in real time, a back-end circuit suitable for resistance measurement of nanoparticle sensors and an organic light emitting diode screen which can display the output of gas concentration data are integrated as a portable device. Compared with the traditional HCHO detection device, this designed system exhibits better stability, excellent selectivity, and high response. Its detection limit is as low as 90 ppb. The gas response to 50 ppm HCHO is 67.63. Further for the quantitative evaluation, we refer to and modify the existing HCHO diffusion model, then carry out a practical test on the HCHO diffusion at the same time. The comparison between the theoretical fitting curve and the actual test curve matched well enough to reflect the potential of this system for the practical HCHO evaluation.