Abstract
The hot isothermal compression tests of high-strength armor steel under a wide range of deformation temperatures (1100-1250 °C) and strain rates of (0.001-1/s) were performed. Based on the experimental data, constitutive models were established using the original Johnson-Cook (JC) model, modified JC model, and strain-compensated Arrhenius model, respectively. The modified JC model considers the coupled effects of strain hardening, strain rate hardening, and thermal softening. Moreover, the prediction accuracy of these developed models was determined by estimating the correlation coefficient (R) and average absolute relative error (AARE). The results demonstrate that the flow behavior of high-strength armor steel is considerably influenced by the strain rate and temperature. The original JC model is inadequate to provide good description on the flow stress at evaluated temperatures. The modified JC model and strain-compensated Arrhenius model significantly enhance the predictability. It is also observed from the microstructure study that at low strain rates (0.001-0.01/s) and high temperatures (1200-1250 °C), a typical dynamic recrystallization (DRX) occurs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have