Abstract
The thermal deformation and precipitation behavior at 900-1100℃ and strain rate of 0.1-5s-1 were studied by Gleeble-3800 thermal simulator of Q1030 high strength steel. The activation energy of hot deformation in austenite region was determined by regression method, and the hot deformation equation of the Q1030 high strength steel was established. The critical strain and peak strain of dynamic recrystallization were predicted accurately by fitting the inflection point with cubic polynomial of curve of Q1030 high strength steel, and relationship between critical strain and Z parameter was established. Finally, the precipitation behavior of Nb and Ti particles during low strain rate deformation was studied, the results show that the precipitated phases in steel are rectangular TiN, quadratic (Nb, Ti) (C, N) carbonitride, elliptical (Nb, Ti) C carbide and NbC. Thermodynamic calculation shows that the order of precipitation of the second phase in steel is TiN, TiC, NbC and NbN.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call