Abstract
Constitutive behavior and microstructural evolution of FeMnSiCrNi shape memory alloy (SMA) subjected to compressive deformation at high temperatures were investigated based on the different deformation conditions. According to Arrhenius type equation, the constitutive equation of FeMnSiCrNi SMA was constructed according to strain compensation, where material parameters vary with increasing strain. The involved constitutive equation can effectively predict the flow stress during dynamic recrystallization (DRX) of FeMnSiCrNi SMA. All the compressed FeMnSiCrNi samples consist of ε martensite and γ austenite. In addition, dislocations, stacking faults and austenite twins were also found in the deformed FeMnSiCrNi samples. Owing to the occurrence of DRX, the grain size increases with increasing deformation temperature. Furthermore, with increasing deformation temperature, the fraction of large angle grain boundaries increases while the one of low angle grain boundaries decreases. Deformation temperature also affects the texture of FeMnSiCrNi SMA. With increasing deformation temperature, 〈110〉 texture becomes weak gradually in the γ austenite, but 〈001〉 texture and cube texture are intensified gradually along with the onset of 〈110〉 and 〈111〉 fiber textures. Moreover, ε martensite possesses 112¯2 fiber texture.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.