Abstract
A large number of post-tensioned concrete bridges were built in the second half of the last century. They have often been insufficiently maintained during their lifetime (usually around 50 years). Nowadays, these structures exhibit significant deterioration, mainly due to leakages and also due to various other deficiencies such as a small concrete cover. Their load-bearing capacity needs to be verified. This paper focuses on estimating the load-bearing capacity calculation of existing post-tensioned concrete bridges. In the engineering practice, this is carried out using the partial factor method according to the currently valid standards (Czech standards ČSN and the Eurocodes), which often impose more stringent requirements than the original standards. The partial factor method then often leads to low load-bearing capacities. This study deals with the bridge for which a very low load-bearing capacity has been determined. For this reason, a comparative probabilistic analysis was performed, allowing for a better description of the uncertainties in the resistance and load effect variables. The probabilistic approach appears to be less conservative and yields a higher load-bearing capacity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.