Abstract
This study undertaken on a nine-year-old cracked concrete panel further investigates the impact of cracks on the corrosion performance of conventional steel reinforcement in marine-exposed concrete to explain observed monitoring data. The present data covers seven 1.80 m long (12.6 m) reinforcing bars embedded in good quality concrete (w/b = 0.40 and cover >75 mm). Each bar was crossed by two horizontal cracks (surface crack widths 0.20–0.30 mm). The investigation showed no corrosion on the surface of the reinforcing bars, in either cracked or uncracked areas. Two of the seven reinforcing bars were instrumented in the vicinity of the cracks. Extensive corrosion was found in the interior of all instrumented parts of these bars. This may explain the monitoring data despite the lack of corrosion on the exterior surface of the two instrumented rebars. However, with no other weaknesses, the remaining conventional rebars showed no impact from the cracks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.