Computer simulation of flocs interactions: Application in fiber suspension

Abstract

The present effort is the development of a multiscale modeling, simulation methodology for investigating complex phenomena arising from flowing fiber suspensions. Specific consideration was given to dynamic simulations of viscoelastic fibers in which the fluid flow is predicted by a method that is a hybrid between Direct Numerical Simulations (DNS) and Large Eddy Simulation techniques (LES), and fluid fibrous structure interactions (FSI) will be taken into account. Numerical results are presented for which focus is on fiber floc deformation by hydrodynamic forces in turbulent flows. Dynamics of simple fiber networks in a shearing flow of water in a channel flow illustrate that the shear-induced bending of the fiber network is enhanced near the walls. Fiber–fiber interaction in straight ducts is also investigated and results show that deformations would be expected during the collision when the surfaces of flocs will be at contact. Smaller velocity magnitudes of the separated fibers compare to the velocity before collision implies the occurrence of an inelastic collision. In addition because of separation of vortices interference flows around two flocs become very complicated. The results opening the possibility for developing a meaningful numerical model of the fiber flow at the continuum level where an Eulerian multi-phase flow model can be developed for industrial use.